Your watercooling and modding distributor
No results were found for the filter!
Article no.: 1019539
> 50 ready for shipment, delivery time 1-3 days
Alphacool ES Laing DDC310 Pump - Single black plastic bottom
Color:
black
Power connector:
4Pin Molex
Max. Flow:
200l/h, Standard (smaller than 500l/h)
Max. Discharge head:
2,44m, Good (2 to 4m)
Power input:
10W
Water outlet:
Not available
Water inlet:
Not available
Material:
Hartcoal, Brass, Aluminiumoxid
Voltage:
12V DC
Max. System temperature:
60° C
Approved fluids:
Water, Water/ glycol mixture
Manufacturer:
Alphacool
Dimensions:
62 x 62 x 28 mm
577,64 NOK
*
Article no.: 1011010
> 50 ready for shipment, delivery time 1-3 days
Alphacool Laing DDC310 - Single Edition - black
Color:
black
Power connector:
4Pin Molex
Max. Flow:
200l/h, Standard (smaller than 500l/h)
Max. Discharge head:
2,44m, Good (2 to 4m)
Power input:
10W
Water outlet:
Not available
Water inlet:
Not available
Material:
Hartcoal, Brass, Aluminiumoxid
Voltage:
12V DC
Max. System temperature:
60° C
Approved fluids:
Water, Water/ glycol mixture
Manufacturer:
Alphacool
Dimensions:
61 x 60 x 21 mm
646,94 NOK
*
Article no.: 1011009
Delivery: in 3 - 4 days
Alphacool Laing DDC310 - Single Edition - silver
Color:
black
Power connector:
4Pin Molex
Max. Flow:
200l/h, Standard (smaller than 500l/h)
Max. Discharge head:
2,44m, Good (2 to 4m)
Power input:
10W
Water outlet:
Not available
Water inlet:
Not available
Material:
Hartcoal, Brass, Aluminiumoxid
Voltage:
12V DC
Max. System temperature:
60° C
Approved fluids:
Water, Water/ glycol mixture
Manufacturer:
Alphacool
Dimensions:
61 x 60 x 21 mm
646,94 NOK
*
Article no.: 1013170
> 10 ready for shipment, delivery time 1-3 days
Laing DDC-Pumpe 12V DDC-1T PWM - Special Edition
Color:
black
Approved fluids:
Water, Water/ glycol mixture
Water inlet:
G1/4" inner thread
Water outlet:
G1/4" inner thread
Voltage:
12V DC
496,79 NOK
*
Article no.: 49135
> 50 ready for shipment, delivery time 1-3 days
Laing DDC-pump 12V DDC 3.2 PWM
Color:
black
Approved fluids:
Water, Water/ glycol mixture
Max. System temperature:
60° C
Voltage:
12V DC
Material:
Hartcoal
Power connector:
4Pin Molex
Max. Flow:
Highflow (from 500 up to 1400l/h), 600l/h
Power input:
18W
Max. Discharge head:
Extreme (more than 4m), 4,7m
Manufacturer:
Laing
Possible control range:
6-13,2V DC
Dimensions:
62 x 62 x 38 mm
Water outlet:
Schlauchtülle 8-10mm
Water inlet:
Schlauchtülle 8-10mm
808,78 NOK
*
Article no.: 49119
> 50 ready for shipment, delivery time 1-3 days
Laing DDC-pump 12V DDC 3.25 18W
Color:
black
Power connector:
3Pin Molex
Approved fluids:
Water, Water/ glycol mixture
Max. System temperature:
60° C
Voltage:
12V DC
Max. Flow:
Highflow (from 500 up to 1400l/h), 900l/h
Power input:
18W
Max. Discharge head:
Extreme (more than 4m), 5,7m
Manufacturer:
Laing
Possible control range:
6-13,2V DC
Material:
Stainless steel, Alumina, Hartcoal
Dimensions:
90 x 62 x 38 mm
Water outlet:
Schlauchtülle 8-10mm
Water inlet:
Schlauchtülle 8-10mm
808,78 NOK
*
Article no.: 49023
Delivery time about 30 - 60 days
Laing DDC-Pump 12V DDC-1RT with 2xG1/4-outer thread
Color:
black
Manufacturer:
Laing
Water inlet:
G1/4" outer thread
Material:
Stainless steel, Alumina, Hartcoal
Dimensions:
62 x 62 x 38 mm
Others:
1x 3Pin Speedometer
Possible control range:
6-13,2V DC
Water outlet:
G1/4" outer thread
Power input:
18W
Approved fluids:
Water, Water/ glycol mixture
Max. Flow:
Standard (smaller than 500l/h), 420l/h
Power connector:
4Pin Molex
Voltage:
12V DC
Max. Discharge head:
3,7m, Good (2 to 4m)
Max. System temperature:
60° C
808,78 NOK
*
Article no.: 49017
> 10 ready for shipment, delivery time 1-3 days
Laing DDC-Pump 12V DDC-1RT/Plus with 2xG1/4-outer thread
Color:
black
Max. Discharge head:
4,7m, Extreme (more than 4m)
Material:
Stainless steel, Alumina, Hartcoal
Dimensions:
62 x 62 x 38 mm
Others:
1x 3Pin Speedometer
Possible control range:
6-13,2V DC
Water outlet:
G1/4" outer thread
Manufacturer:
Laing
Approved fluids:
Water, Water/ glycol mixture
Power input:
18W
Max. Flow:
600l/h, Highflow (from 500 up to 1400l/h)
Power connector:
4Pin Molex
Voltage:
12V DC
Max. System temperature:
60° C
Water inlet:
G1/4" outer thread
958,93 NOK
*
Article no.: 49064
> 50 ready for shipment, delivery time 1-3 days
Laing DDC-pump 12V DDC-1T
Color:
black
Manufacturer:
Laing
Water outlet:
Schlauchtülle 8-10mm
Max. Flow:
420l/h, Standard (smaller than 500l/h)
Material:
Stainless steel, Alumina, Hartcoal
Dimensions:
62 x 62 x 38 mm
Others:
1x 3Pin Speedometer
Possible control range:
6-13,2V DC
Approved fluids:
Water, Water/ glycol mixture
Power input:
10W
Power connector:
4Pin Molex
Voltage:
12V DC
Max. Discharge head:
3,7m, Good (2 to 4m)
Max. System temperature:
60° C
Water inlet:
Schlauchtülle 8-10mm
693,14 NOK
*
Article no.: 49065
> 50 ready for shipment, delivery time 1-3 days
Laing DDC-pump 12V DDC-1T Plus
Color:
black
Max. Discharge head:
4,7m, Extreme (more than 4m)
Water outlet:
Schlauchtülle 8-10mm
Material:
Stainless steel, Alumina, Hartcoal
Dimensions:
62 x 62 x 38 mm
Others:
1x 3Pin Speedometer
Possible control range:
6-13,2V DC
Manufacturer:
Laing
Approved fluids:
Water, Water/ glycol mixture
Power input:
18W
Max. Flow:
600l/h, Highflow (from 500 up to 1400l/h)
Power connector:
4Pin Molex
Voltage:
12V DC
Max. System temperature:
60° C
Water inlet:
Schlauchtülle 8-10mm
739,34 NOK
*
