Your watercooling and modding distributor Your watercooling and modding distributor

Alphacool Laing DDC310 - Complete Edition Eisdecke - plata/plexi

  • 1012353
  • 13197
  • 4250197131971
  • 0,631 kg

> 50 ready for shipment, delivery time 1-3 days

842,60 NOK *

*inkl. MwSt. zzgl. Versandkosten

Recommended accessories
Aufpreis
Phobya external PSU 230V to 4Pin Molex 34 Watt including Euro/UK plug
1x
Phobya external PSU 230V to 4Pin Molex 34 Watt including Euro/UK plug
207,35 NOK*
Alphacool's new Laing Low Noise Edition for absolute silence! The well-known Laing DDC pumps...more
Product Information

Alphacool's new Laing Low Noise Edition for absolute silence!

The well-known Laing DDC pumps are getting a new addition. Though freshly packaged, this pump can begin its life with lots of self-confidence. A few details have been changed. First, we held back a little in performance in order to solve a widespread problem: the volume! Few other pumps can match this one in terms of reducing noise generation from water. For the most up-to-date water cooling systems with CPU and GPU cooling, this pump should be the first choice.

Unlike before, this pump does not come in the familiar plastic casing. It has an all-new perfectly tailored brass case gracing its exterior. This new case ensures a longer lifespan for the pump. Air flows through the cooling fins, then over an interior thermal pad directly to the pump board. 

Another feature is the included decoupling option. With the special M4 screws, the included decoupling can be screwed into the head of the screws and then attached to the case.

The innovation in this set is that it uses the V.2 of the Alphacool "Eisdecken", which provides you the options of three G1/4" connections for the inlet and two G1/4" connections for the outlet.

Inlet options: front, side, top

Outlet options: front, top

The scope of delivery also includes three G1/4" screw plugs for sealing the unused in/out connection ports.

Another feature is the pre-installed brackets, as seen before on the new "Eisbecher". This allows the pump set to be mounted directly onto the case bottom. 

Now available as a combo with the tried and tested Alphacool Eisdecke Laing DDC Plexi or Acetal Top!

Technical Details:

  • Dimensions: 89 x 85 x 75mm
  • Colour: silver / plexi
  • Power consumption: 10W
  • Material: brass, stainless steel, aluminium oxide, hard carbon, plexiglass 
  • Maximum head: 2.44m
  • Maximum system temperature: 60°C
  • Maximum flow rate: 200L/h
  • Voltage: 12V DC
  • Electrical connection: 4 pin Molex
  • Speed sensor: 3 pin Molex

Scope of Delivery:

  • 1x Alphacool Laing DDC310 pump
  • 1x Alphacool Laing DDC metal bottom - silver
  • 1x Alphacool Eisdecke Laing DDC plexi top V.2
  • Decoupling set
  • Mounting material

 

Manual

Download 3D-file (.stp)

Notice:

Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.

We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.

Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.

Awards and documents
Technical details and videos ... moor
Technical details
Color: black
Power connector: 4Pin Molex
Max. Flow: 200l/h, Standard (smaller than 500l/h)
Max. Discharge head: 2,44m, Good (2 to 4m)
Power input: 10W
Water outlet: Not available
Water inlet: Not available
Material: Hartcoal, Brass, Aluminiumoxid
Voltage: 12V DC
Max. System temperature: 60° C
Approved fluids: Water, Water/ glycol mixture
Manufacturer: Alphacool
Dimensions: 61 x 60 x 21 mm
Videos
Questions & Answers more
Questions & Answers
Question from Guest #306555 from 05. May 2018
Can I use this pump vertically in every orientation?
Antwort von Aquatuning GmbH vom 05. May 2018
The pump is recommended for horizontally mounting.
3 Question (s) in other languages.
Click here to display this question (s).
Question from Guest #238890 from 09. September 2016
Hallo, wie sind die Maße der Pumpe inkl. Füße, Eisdecke AGB und Verschlussschrauben? Danke
Antwort von Aquatuning GmbH vom 09. September 2016
120mm haben die Artikel laut Beschreibung zusammen, kommt noch die Verschlussschraube dazu, dann liegt man ca. bei 123mm.
Antwort von M.P. vom 01. January 2017
Wie sind den die Abmasse der abgebildeten Konfiguration (Pumpe, Füsse und Eisdecke-Aufsatz)?
Question from Guest #252909 from 09. September 2016
kann man diese pumpe gut mit dem Alphacool Cape Corp Coolplex Pro 15 LT Ausgleichsbehälter kombinieren?
Antwort von Aquatuning GmbH vom 09. September 2016
Ohne weiteres, jeder Solo Behälter kann mit dieser Pumpe betrieben werden.
Question from Marcel from 07. July 2018
Braucht man hier noch zusätzlich einen AGB oder reicht die Kombo so wie sie ist?
Antwort von Aquatuning GmbH vom 07. July 2018
Nein, ein Ausgleichsbehälter gehört noch dazu. Ob oben drauf (Artikel Nr. 1011327) oder separate AGBs ist dabei dem Kunden überlassen.
Read, write and discuss reviews...more
Reviews
5 Stars:
(1)
4 Stars:
(0)
3 Stars:
(0)
2 Stars:
(0)
1 Stars:
(0)
1 Review(s) in other languages.
Click here to show.
Alphacool tubing AlphaTube HF 13/10 (3/8"ID) - clear 3m (9,8ft) Retailbox Alphacool tubing AlphaTube HF 13/10 (3/8"ID) -...
Content 300 cm (40,24 NOK * / 100 cm)
120,73 NOK *
-25%
Alphacool Eisrohr 13/10mm PETG HardTube 60cm - 4pcs Alphacool Eisrohr 13/10mm PETG HardTube 60cm -...
Content 240 cm (67,15 NOK * / 100 cm)
161,15 NOK *
Alphacool Eisrohr 16/13mm PETG HardTube 80cm - 4pcs Alphacool Eisrohr 16/13mm PETG HardTube 80cm -...
Content 320 cm (79,23 NOK * / 100 cm)
253,55 NOK *