This is the ideal top for the Alphacool DC-LT pump.
This top is designed in such a way to allow mounting on the Alphacool DC-LT pump. With the top it is possible to integrate this miniature pump into your water cooling loop via ¼” threads.
The inlet fitting can be connected on the side or on top of the unit. The outlet is then connected to the opposite side.
All silent system enthusiasts will be happy to hear that threads were implemented to allow decoupling with e.g. Item No. 13701. With these decouplers the pump and top can be mounted in a 3.5” drive bay.
Thought was also given to the case modders amongst us, a 5mm LED hole near the outlet allows unique lighting effects for your system.
Dimensions (LxWxH): 49x49x24mm (without fittings, without pump)
Material: Röhm Plexiglas GS
Mounting: 4x M4 threads
Connection threads: 3x ¼”
Extent of delivery:
1x Alphacool top DC-LT Plexi
Mounting screws for the DC-LP pump
Note: For operation of the top only one of the two inlet openings is needed. Hence we recommend ordering a screw plug with this top.
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
Click here to show.
Sehr gute Verarbeitung, Passgenauigkeit für DC-LT Pumpe wie erwartet!
Wunderschöner Aufsatz, hochwertiges und sauber poliertes Material wurde verwendet. Verarbeitung lässt keine Wünsche offen und das LED-Licht durchleuchtet den gesamten Deckel.