- Article no.: 1012390
- Manufacturer no.: 12532
- EAN: 4250197125321
- Weight: 0,171 kg
> 50 ready for shipment, delivery time 1-3 days
inkl. MwSt. zzgl. Versandkosten
Fitted to the new GPX graphics cards, SLI bridges are now available.
But they aren't just simple SLI bridges: through the option to plug 5mm LEDs into the SLI bridge, its colour can be matched to your system as well. The Alphacool logo is illuminated through a 3-pin connection with pre-installed LEDS.
2 graphics cards can be cooled with the SLI connection, in which flow passes through the coolers in a row.
Installation is very simple using the included fittings. The special connectors have a ¼" thread on one side and a straight piece of pipe on the other side, which is simply plugged into the SLI bridge (double O-ring). This way it can still be installed if the coolers are already mounted.
Scope of delivery:
- 1x Alphacool GPX SLI Connector - Dual asymmetric
- 4x connectors
The SLI connectors may only be used to connect the same types of graphics cards. Alphacool takes no responsibility for use with different graphics cards, as there could be minimal differences in the spacing, causing the SLI connector to fit incorrectly and not lock or seal properly.
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|Compatibility:||Alphacool NexXxoS GPX|
Click here to display this question (s).