|Design:||1x 5,25" Drive bay|
|Max. Power / Channel:||30W|
|Number of outputs:||4x 3Pin Molex|
|Number of sensors:||4x 2Pin (10kOhm)|
|Power supply:||4Pin Molex 12V DC|
|Output voltage:||6 - 12V DC|
|Dimensions:||148,5 x 42 x 79,9mm|
|Display dimensions:||110 x 20mm|
Depending on the temperature / season and the utilization the computer needs more fan ventilation or less. To have a good cooling performance when needed but also low noise when you do not need the cooling performance makes it necessary to adjust the fan speed depending on the need. The solution is the Phobya TPC fan controller which is offered at an unbeatable price level. Furthermore the Phobya TPC fan controller can not only adjust the fan speed, but also the pump speed if you are using a water cooling system in your computer. A lot of pumps (if run at 12V) are a little too noisy, and can be reduced if the pump power is not needed. Depending on the pump you use, it may happen that you reduce the pump voltage and gain a much more silent PC, but you lose nearly no cooling power in your water cooling system.
On the display of the Phobya TPC pump and fan controller you can see the RPM of up to 4 different pumps or fans. There are also 4 temperature sensors included which can be placed in the computer case so that you get all the information about the inside of your computer with one view on the blue enlightened display. If the signal of a fan or pump fails, then the controller gives a loud noise that will catch you attention.
If 4 pump or fan channels are is not enough, then you can connect more fans to one output. Because of the extra high output of maximum 30Watt per each channel, it is possible to handle several fans with one channel. You will need additional fan cable connectors for that, which are not included.
The front of the controller has a classical black Aluminum design which gives the faceplate and the rotary knob a very high-quality feeling which fits to most of black and silver computer cases. The display ha an overall size of 11x2 cm and is illuminated in a blue color, so that the RPM and temperature can be viewed very clearly. The controller fits perfect into one 5 ¼ computer dive bay.
The controller can adjust the output voltage from 6V (for low noise) to 12V (for maximum power). Of course you can adjust all voltages in-between. The power cable is 60cm long and can be plugged with a 4-pin Molex plug into the computer power supply. For the output 4 cables are included with a length of 60cm each which have a 3-pin plug that fits perfect into the fans (also into PWM-fans) and a lot of pumps. To fix the temperature sensors there are small glue-pads included, so that you can place the sensors wherever you want. Finally all cables come with a high-quality black sleeving which will fit perfect into your computer case.
Dimensions: 148,5 x 42 x 79,9mm (5,25" bay drive)
Measurement of the display: 110 x 20mm
Output voltage: 6-12V
Maximum power for each channel: 30W
Number of channels: 4
Number of temperature sensors: 4
Extend of delivery:
1x Phobya TPC 4x Fan- or Pump-Controller 30Watt each Channel - Single Bay 5,25"
1x 60cm power cable to 4-pin Molex
4x 60cm fan cable to 3-pin
4x 60cm temperature sensors
4x mounting screws
4x self-gluing pads for the sensors
Klicken Sie hier, um diese Frage(n) anzuzeigen.
Klicken Sie hier, um diese Bewertungen anzuzeigen.
super schöne verarbeitung und ein klasse produkt wo man für wenig geld ne menge bekommt
den Fan controller? davon habe ich 3 im Betrieb ist ganz einfach zu installieren sieht am anfang komisch aus Erklärt sich aber von allein
Gute Qualität/ Verabeitung und dazu noch ein ansprechendes Design!
Für den geringen Preis ein, sehr edel erscheinendes Gerät. Schöne verarbeitung, die Alu-Front ist wundervollausgearbeitet, die Knöpfe so wie das Display harmonieren sehr gut mit dem Rest. Alles in allem, ein absolut super Preis-Leistungs verhältnis.